Sync from My Hours to Redis

with open data movement

Extract and load (ELT) your My Hours data into Redis in minutes with our open-source data integration connector.

Eliminate the time you spend on building and maintaining your data pipelines by integrating your data with Airbyte instead.
300+ connectors
14-day free trial
20,000+
community members
6,000+
daily active companies
2PB+
synced/month
900+
contributors

Top companies trust Airbyte to centralize their Data

Start syncing data from My Hours to Redis in three easy steps

1

Setup a My Hours connector in Airbyte

Connect to My Hours or one of 400 Airbyte data sources through simple account authentication

2

Set up Redis as the destination connector

Connect to Redis or one of 50+ Airbyte data destinations through simple account authentication

3

Sync your Data

This includes selecting the data you want to extract - streams and columns -, the sync frequency, where in Redis you want that data to be loaded.

LOVED by 10,000 (DATA) ENGINEERS

Ship more quickly with the only solution that fits ALL your needs.

As your tools and edge cases grow, you deserve an extensible and open ELT solution that eliminates the time you spend on building and maintaining data pipelines

Leverage the largest catalog of  connectors

Airbyte’s catalog of 300+ pre-built, no-code connectors is the largest in the industry and is doubling every year, thanks to its open-source community, while closed-source catalogs have plateaued.

Cover your custom needs with our extensibility

Build custom connectors in 10 min with our Connector Development Kit (CDK), and get them maintained by us or our community. Add them to Airbyte to enable your whole team to leverage them.
Customize ANY Airbyte connectors to address Your custom needs. Our connector’s code is open-source, so you can edit it as you see fit.

Reliability at every level

Airbyte ensure your team’s time is no longer time spent on maintenance with our reliability SLAs on our GA connectors.
Airbyte will also give you visibility and control of your data freshness at the stream level for all your connections.

It’s never been easier to integrate your My Hours data into Redis

Airbyte Open Source

Self-host the leading open-source data movement platform with the largest catalog of ELT connectors.

Airbyte Cloud

The easiest way to address all your ELT needs. Largest catalog of connectors, all customizable.

Airbyte Enterprise

The best way to run Airbyte in self-hosted, with services and features that drive reliability, scalability, and compliance.
Learn more
TRUSTED BY 3,000+ COMPANIES DAILY

Why choose Airbyte as the backbone of your data infrastructure?

Keep your data engineering costs in check

Building and maintaining custom connectors have become 5x easier with Airbyte. Enable your data engineering teams to focus on projects that are more valuable to your business.
Given 44% of data teams are spent on maintaining brittle in-house connectors, this is a new level of internal resources that you get back.

Get Airbyte hosted where you need it to be

Airbyte helps you deploy your pipelines in production with two deployment options for the data plane:
  • Airbyte Cloud: Have it hosted by us, with all the security you need (SOC2, ISO, GDPR, HIPAA Conduit).
  • Airbyte Enterprise: Have it hosted within your own infrastructure, so your data and secrets never leave it.

White-glove enterprise-level support

With an average response rate of 10 minutes or less and a Customer Satisfaction score of 96/100, our team is ready to support your data integration journey all over the world.

Including for your Airbyte Open Source instance with our premium support.
Case study
Consolidating data silos at Fnatic

Fnatic, based out of London, is the world's leading esports organization, with a winning legacy of 16 years and counting in over 28 different titles, generating over 13m USD in prize money. Fnatic has an engaged follower base of 14m across their social media platforms and hundreds of millions of people watch their teams compete in League of Legends, CS:GO, Dota 2, Rainbow Six Siege, and many more titles every year.

FAQs

What is ETL?

ETL, an acronym for Extract, Transform, Load, is a vital data integration process. It involves extracting data from diverse sources, transforming it into a usable format, and loading it into a database, data warehouse or data lake. This process enables meaningful data analysis, enhancing business intelligence.

What is My Hours?

My Hours was launched back in 2002 and it is a cloud-based time-tracking solution best suited for small teams and freelancers. Since then My Hours has been rewritten twice to meet the growing demands and it is a product of Spica, a company headquartered in Ljubljana with 100+ employees. The users of My Hours can start time tracking on unlimited projects and tasks in seconds which easily generates insightful reports and create invoices.

What is Redis?

Redis is an open-source, in-memory data structure store that can be used as a database, cache, and message broker. It supports a wide range of data structures such as strings, hashes, lists, sets, and sorted sets. Redis is known for its high performance, scalability, and flexibility. It can handle millions of requests per second and can be used in a variety of applications such as real-time analytics, messaging, and session management. Redis also provides advanced features such as pub/sub messaging, Lua scripting, and transactions. It is widely used by companies such as Twitter, GitHub, and StackOverflow.

What data can you extract from My Hours?

My Hours' API provides access to a variety of data related to time tracking and project management. The following are the categories of data that can be accessed through the API:  

1. Time tracking data: This includes information about the time spent on tasks, projects, and clients. It includes start and end times, duration, and any notes or comments associated with the time entry.  
2. Project data: This includes information about the projects being worked on, such as project name, description, status, and associated tasks.  
3. Task data: This includes information about the individual tasks within a project, such as task name, description, status, and associated time entries.  
4. Client data: This includes information about the clients being worked with, such as client name, contact information, and associated projects.  
5. User data: This includes information about the users of the My Hours platform, such as user name, email address, and associated time entries, projects, and tasks.  

Overall, the My Hours API provides a comprehensive set of data that can be used to analyze and optimize time tracking and project management processes.

How do I transfer data from My Hours to Redis?

This can be done by building a data pipeline manually, usually a Python script (you can leverage a tool as Apache Airflow for this). This process can take more than a full week of development. Or it can be done in minutes on Airbyte in three easy steps: 
1. Set up My Hours as a source connector (using Auth, or usually an API key)
2. Set up Redis as a destination connector
3. Define which data you want to transfer and how frequently
You can choose to self-host the pipeline using Airbyte Open Source or have it managed for you with Airbyte Cloud. 

What are top ETL tools to extract data from

The most prominent ETL tools to transfer data from My Hours to Redis include:
- Airbyte
- Fivetran
- StitchData
- Matillion
- Talend Data Integration
These tools help in extracting data from My Hours and various sources (APIs, databases, and more), transforming it efficiently, and loading it into Redis and other databases, data warehouses and data lakes, enhancing data management capabilities.

What is ELT?

ELT, standing for Extract, Load, Transform, is a modern take on the traditional ETL data integration process. In ELT, data is first extracted from various sources, loaded directly into a data warehouse, and then transformed. This approach enhances data processing speed, analytical flexibility and autonomy.

Difference between ETL and ELT?

ETL and ELT are critical data integration strategies with key differences. ETL (Extract, Transform, Load) transforms data before loading, ideal for structured data. In contrast, ELT (Extract, Load, Transform) loads data before transformation, perfect for processing large, diverse data sets in modern data warehouses. ELT is becoming the new standard as it offers a lot more flexibility and autonomy to data analysts.

My Hours to Redis in minutes.

ETL your My Hours data into Redis, in minutes, for free, with our open-source data integration connectors. In the format you need with post-load transformation.

We don't support the
Redis
connector yet. Scroll down to upvote and prioritize it, or check our Connector Development Kit to build it within 2 hours.
We don't support the
My Hours
connector yet. Scroll down to upvote and prioritize it, or check our Connector Development Kit to build it within 2 hours.
We don't support the
My Hours
and
Redis
connectors yet. Scroll down to upvote and prioritize them, or check our Connector Development Kit to build it within 2 hours.

Select the My Hours data that you want to replicate.

The My Hours source connector can be used to sync the following tables:

Organize projects
Includes Assign a project to a client and set as billable or not billable.
Project budgeting
Includes Decide how much time are you willing to spent on a project. Monthly retainers are supported.
Track time and expenses
Track time and expenses
Set billing rates
Includes Hourly rates can be set per project, per task or team member.
Track your costs
Includes Approximate hourly rates of your team in order to calculate the project costs.

About My Hours

My Hours was launched back in 2002 and it is a cloud-based time-tracking solution best suited for small teams and freelancers. Since then My Hours has been rewritten twice to meet the growing demands and it is a product of Spica, a company headquartered in Ljubljana with 100+ employees. The users of My Hours can start time tracking on unlimited projects and tasks in seconds which easily generates insightful reports and create invoices.

Start analyzing your My Hours data in minutes with the right data transformation

airbyte data transformation screenshot

Full control over the data

You select the data you want to replicate, and this for each destination you want to replicate your

My Hours

data to.

Normalized schemas

You can opt for getting the raw data, or to explode all nested API objects in separate tables.

Custom transformation via dbt

You can add any dbt transformation model you want and even sequence them in the order you need, so you get the data in the exact format you need at your cloud data warehouse, lake or data base.

Airbyte is designed to address 100% of your Redis needs

calendar icon

Scheduled updates

Automate replications with recurring incremental updates to

Redis

.

play
Replicate Salesforce data to Snowflake with incremental

Manual full refresh

Easily re-sync all your data when

Redis

has been desynchronized from the data source.

Change Data Capture for databases

Ensure your database are up to date with log-based incremental replication.

play
Check how log replication works for PostgreSQL

About Redis

Redis is an open-source, in-memory data structure store that can be used as a database, cache, and message broker. It supports a wide range of data structures such as strings, hashes, lists, sets, and sorted sets. Redis is known for its high performance, scalability, and flexibility. It can handle millions of requests per second and can be used in a variety of applications such as real-time analytics, messaging, and session management. Redis also provides advanced features such as pub/sub messaging, Lua scripting, and transactions. It is widely used by companies such as Twitter, GitHub, and StackOverflow.

Why Choose Airbyte for your My Hours and Redis data integration

Airbyte is the new open-source ETL platform, and enables you to replicate your

My Hours

data in the destination of your choice, in minutes.

Maintenance-free

Heading

connector

Just authenticate your My Hours account and destination, and your new My Hours data integration will adapt to schema / API changes.

Extensible as open-sourced

With Airbyte, you can easily adapt the open-source My Hours ETL connector to your exact needs. All connectors are open-sourced.

No more security compliance issues​

Use Airbyte’s open-source edition to test your data pipeline without going through 3rd-party services. This will make your security team happy.

Normalized schemas​

Engineers can opt for raw data, analysts for normalized schemas. Airbyte offers several options that you can leverage with dbt.

Orchestration & scheduling​

Airbyte integrates with your existing stack. It can run with Airflow & Kubernetes and more are coming.

Monitoring & alerts on your terms​

Delays happen. We log everything and let you know when issues arise. Use our webhook to get notifications the way you want.

My Hours to Redis in minutes

ETL your My Hours data into Redis, in minutes, for free, with our open-source data integration connectors. In the format you need with post-load transformation.

We don't support the
My Hours
connector yet. Scroll down to upvote and prioritize it, or check our Connector Development Kit to build it within 2 hours.
We don't support the
Redis
connector yet. Scroll down to upvote and prioritize it, or check our Connector Development Kit to build it within 2 hours.
We don't support the
My Hours
and
Redis
connectors yet. Scroll down to upvote and prioritize them, or check our Connector Development Kit to build it within 2 hours.

Airbyte is designed to address 100% of your My Hours database needs.

Full control over the data

The 

My Hours

 source does not alter the schema present in your database. Depending on the destination connected to this source, however, the schema may be altered.

calendar icon

Scheduled updates

Automate replications with recurring incremental updates.

Log-based incremental replication

Ensure your database are up to date with log-based incremental replication.

play
Check how log replication works for PostgreSQL

About My Hours

My Hours was launched back in 2002 and it is a cloud-based time-tracking solution best suited for small teams and freelancers. Since then My Hours has been rewritten twice to meet the growing demands and it is a product of Spica, a company headquartered in Ljubljana with 100+ employees. The users of My Hours can start time tracking on unlimited projects and tasks in seconds which easily generates insightful reports and create invoices.

Start analyzing your My Hours data in minutes with the right data transformation

airbyte data transformation screenshot

Full control over the data

You select the data you want to replicate, and this for each destination you want to replicate your My Hours data to.

Normalized schemas

You can opt for getting the raw data, or to explode all nested API objects in separate tables.

Custom transformation via dbt

You can add any dbt transformation model you want and even sequence them in the order you need, so you get the data in the exact format you need at your cloud data warehouse, lake or data base.

Airbyte is designed to address 100% of your Redis needs

calendar icon

Scheduled updates

Automate replications with recurring incremental updates to Redis.

play
Replicate Salesforce data to Snowflake with incremental

Manual full refresh

Easily re-sync all your data when Redis has been desynchronized from the data source.

Change Data Capture for databases

Ensure your database are up to date with log-based incremental replication.

play
Check how log replication works for PostgreSQL

About Redis

Redis is an open-source, in-memory data structure store that can be used as a database, cache, and message broker. It supports a wide range of data structures such as strings, hashes, lists, sets, and sorted sets. Redis is known for its high performance, scalability, and flexibility. It can handle millions of requests per second and can be used in a variety of applications such as real-time analytics, messaging, and session management. Redis also provides advanced features such as pub/sub messaging, Lua scripting, and transactions. It is widely used by companies such as Twitter, GitHub, and StackOverflow.

Why choose Airbyte for your My Hours and Redis data integration.

Airbyte is the new open-source ETL platform, and enables you to replicate your My Hours data in the destination of your choice, in minutes.

Maintenance-free

Heading

connector

Just authenticate your

My Hours

account and destination, and your new

My Hours

data integration will adapt to schema / API changes.

Extensible as open-sourced

With Airbyte, you can easily adapt the open-source

My Hours

ETL connector to your exact needs. All connectors are open-sourced.

No more security compliance issues​

Use Airbyte’s open-source edition to test your data pipeline without going through 3rd-party services. This will make your security team happy.

Normalized schemas​

Engineers can opt for raw data, analysts for normalized schemas. Airbyte offers several options that you can leverage with dbt.

Orchestration & scheduling​

Airbyte integrates with your existing stack. It can run with Airflow & Kubernetes and more are coming.

Monitoring & alerts on your terms​

Delays happen. We log everything and let you know when issues arise. Use our webhook to get notifications the way you want.